Pride Celebrity DX Sport, Owner'S Manual

Page: 34 / 45

34
www.pridemobility.com Celebrity DX Sport
V I I . D I S A S S E M B L Y A N D A S S E M B L Y
DISASSEMBLY
You can disassemble the scooter into seven pieces: the
seat, the front section, the rear section, the rear shroud,
the basket, and the batteries. See figure 20. No tools
are required to disassemble or assemble your scooter,
but keep in mind that the disassembled sections of the
scooter take up more floor space than the assembled
unit. Always disassemble or assemble your scooter on
a level, dry surface with sufficient room for you to work
and move around your scooter—about 6 feet (2 meters)
in all directions. Remember that some scooter compo-
nents are heavy and you may need assistance when
lifting them.
WARNING! Do not lift beyond your
physical capability. Ask for
assistance when necessary while
disassembling or assembling your
scooter.
Figure 21. Tiller Lock Knob (Locked) Figure 21A. Tiller Lock Knob (Unlocked)
UNLOCKED POSITION
LOCKED POSITION
Figure 20. The Scooter Disassembled
SEAT
REAR
SHROUD
REAR SECTION
FRONT SECTION
BATTERIES
BASKET
1. Place the scooter in drive mode by engaging the freewheel lever.
2. Lock the tiller in the straight ahead position by pushing the tiller lock knob in and turning it clockwise 90°. See
figure 21. The front wheel must face forward in order to lock the tiller.
3. Remove the seat by lifting it straight up and off of the scooter. If you encounter resistance when removing the
seat, disengage the seat rotation lever and swivel the seat back and forth while lifting up on the seat.
4. Gently pull the rear shroud up and off of the rear section of the scooter.
5. Unplug the front-to-rear and rear lighting harnesses by squeezing the sides and pulling straight up.
6. Unplug both battery harnesses. Pull each harness straight up. See figure 22.
7. Unfasten the battery tie-down straps and remove the batteries from the battery wells.