Pride Celebrity DX Sport, Owner'S Manual

Page: 27 / 45

27
Celebrity DX Sport www.pridemobility.com
I V . B A T T E R I E S A N D C H A R G I N G
Figure 13. Battery Harnesses and Battery Cables
BATTERY
HARNESSES
BATTERY TERMINALS
UNDER BOOTS
-
-
+
+
BATTERY
BATTERY
Figure 13B. Cable To Terminal
Connection
Figure 13A. Battery Cable
Orientation
How do I change a battery in my scooter?
MANDATORY! Battery posts, terminals, and related accessories contain lead and
lead compounds. Wear goggles and gloves when handling batteries and wash
hands after handling.
WARNING! Always use two batteries of the exact same type, chemistry, and amp-
hour (Ah) capacity. Refer to the specifications table in this manual and in the
manual supplied with the battery charger for recommended type and capacities.
WARNING! Do not mix old and new batteries. Always replace both batteries at the same time.
WARNING! Contact your authorized Pride Provider if you have any questions
regarding the batteries in your scooter.
WARNING! Do not replace the batteries while the scooter is occupied.
WARNING! The batteries on your scooter should only be serviced or replaced by
an authorized Pride Provider or a qualified technician.
1. Remove the seat and rear shroud. See VII. “Disassembly and Assembly.”
2. Disconnect the battery tie-down strap.
3. Disconnect the battery harnesses by pulling them straight up. See figure 13.
4. Disconnect the battery cables from the battery terminals.
5. Remove the old batteries.
6. Place a new battery in each battery well. Face the battery terminals toward the seat post.
7. Connect the red battery cable to the positive (+) battery terminal. See figure 13A.
8. Connect the black battery cable to the nega-
tive (-) battery terminal.
9. Ensure the battery terminals are covered with
the tiller boots.
NOTE: See figure 13B for correct hardware
placement for battery terminal connections.
10. Reconnect the battery harnesses.
11. Reconnect the battery tie-down strap,
making sure the strap is positioned over
the frame release lever to ensure proper
securement. See figure 13C.
12. Reinstall the rear shroud and seat.
NOTE: If you encounter a damaged or
cracked battery, immediately enclose it in a
plastic bag and contact your local waste dis-
posal agency or authorized Pride Provider
for instructions on disposal and battery re-
cycling which is our recommended course
of action.