33
Celebrity Deluxe
www.pridemobility.com
V I I I . D I S A S S E M B L Y A N D A S S E M B L Y
DISASSEMBLY
You can disassemble the scooter into seven pieces: the
seat, the front section, the rear section, the rear shroud,
the basket, and the batteries. See figure 18. No tools
are required to disassemble or assemble your scooter,
but keep in mind that the disassembled sections of the
scooter take up more floor space than when assembled.
Always disassemble or assemble your scooter on a level,
dry surface with sufficient room for you to work and
move around your scooter-about 2 metres in all
directions. Remember that some scooter components
are heavy and you may need assistance when lifting
them.
1. Place the scooter in drive mode by engaging the freewheel lever.
2. Lock the tiller in the straight ahead position by pushing the tiller lock knob in and turning it clockwise 90°. See
figure 19. The front wheel must face forward in order to lock the tiller.
3. Remove the seat by lifting it straight up and off of the scooter. If you encounter resistance when removing the
seat, disengage the seat rotation lever and swivel the seat back and forth while lifting up on the seat.
4. Gently pull the rear shroud up and off of the rear section of the scooter.
5. Unplug the front-to-rear and rear lighting harnesses by squeezing the sides and pulling straight up. See figure 20.
Figure 18. The Scooter Disassembled
SEAT
REAR SHROUD
REAR SECTION
FRONT SECTION
BATTERIES
BASKET
WARNING! Lifting weight beyond
your physical capability may result
in personal injury. Ask for
assistance when necessary while
disassembling or assembling your
scooter.
Figure 19. Tiller Lock Knob (Locked)
Figure 19A. Tiller Lock Knob (Unlocked)
UNLOCKED
POSITION
LOCKED
POSITION
