background image

30

                   www.pridemobility.com

Celebrity  Deluxe

TILLER ANGLE ADJUSTMENT

Your scooter is equipped with an adjustable pivoting tiller.

WARNING! Remove the key from the

key switch before adjusting the tiller,

console, or the seat. Never attempt to

adjust the tiller or the seat while the

scooter is in motion.

To change the tiller angle:
1. Squeeze the tiller adjustment lever. See figure 14.
2. Move the tiller to a comfortable position.
3. Release the tiller adjustment lever to lock the tiller into

place.

NOTE: In order to fully lower the tiller, you must
first remove the seat. Remove the seat by pulling it
straight up and off of the scooter.

TILLER CONSOLE ANGLE ADJUSTMENT

The tiller console can be adjusted to different angles.

To change the console angle:
1. Loosen the adjustment dial (turn anticlockwise) and

move the tiller console up or down to a comfortable
riding position. See figure 14.

2. Hold the console at that position and tighten (turn

clockwise) the adjustment dial.

ARMREST ANGLE ADJUSTMENT

The armrest angle of your scooter can be adjusted up-
ward or downward by turning the adjustment dial. See
figure 15.

NOTE: Pivot the armrests upward to make getting
onto and off of your scooter easier.

SEATBACK  ADJUSTMENT

WARNING!  Do not operate your

scooter with the seatback in a

reclined position.

WARNING! Always keep your back

pressed firmly against the seatback

while adjusting the angle.

V I I .   C O M F O R T   A D J U S T M E N T S

Figure 15. Armrest Angle Adjustment

ADJUSTMENT DIAL

Figure 16. Seatback Adjustment

SEATBACK
ADJUSTMENT
LEVER

Figure 14. Tiller/Tiller Console Adjustment

TILLER ADJUSTMENT LEVER

TILLER CONSOLE ADJUSTMENT DIAL

Summary of Contents for Celebrity Deluxe










































Reviews: