Pride Mobility Victory ES10, Owner'S Manual

Page: 33 / 44

Victory ES Series www.pridemobility.com 33
FRONT-TO-REAR HAR-
NESS CONNECTIONS
V I I . D I S A S S E M B L Y A N D A S S E M B L Y
DISASSEMBLY
You can disassemble the scooter into several
pieces: the seat, the front section, the rear section,
the battery shroud, the basket, and the batteries.
See figure 21. No tools are required to disassem-
ble or assemble your scooter, but keep in mind that
the disassembled sections of the scooter take up
more floor space than the assembled unit. Always
disassemble or assemble your scooter on a level,
dry surface with sufficient room for you to work
and move around your scooter—about 5 feet (1.5
meters) in all directions. Remember that some
scooter components are heavy and you may need
assistance when lifting them.
WARNING! Do not lift beyond
your physical capability. Ask for
assistance when necessary
while disassembling or
assembling your scooter.
1. Remove the seat by lifting it straight up and
off of the scooter. If you encounter resistance
when removing the seat, disengage the seat
rotation lever and swivel the seat back and
forth while lifting up on the seat.
2. Gently pull the battery shroud up and off of
the scooter. See figure 22.
3. Disconnect the battery tie-down strap.
4. Unplug both battery harnesses by depressing
the tabs and then pulling each harness straight
up. See figure 23.
5. Remove the batteries from the battery wells.
6. Disconnect both front-to-rear harnesses. See
figure 23.
WARNING! Failure to unplug both
front-to-rear harnesses prior to
separating the front and rear
sections could result in
permanent damage to the
scooter.
Figure 21. Scooter Components
Figure 23. Harness Connections
FRONT SECTION
SEAT
REAR SECTION
BATTERY SHROUD
BATTERIES
BASKET
BATTERY HARNESS
CONNECTIONS
Figure 22. Battery Shroud Removal