background image

User Manual (Page 11 of 30) 

 

 
 

 

■ 

POWERED VEHICLE ELECTROMAGNETIC INTERFERENCE (EMI) 

 

Because EM energy rapidly becomes more intense as one moves closer to the transmitting antenna 
(source), the EM fields from hand-held radio wave sources (transceivers) are of special concern.  It is 
possible to unintentionally bring high levels of EM energy very close to the powered vehicle’s control 
system while using these devices.  This can affect powered vehicle movement and braking.  Therefore, 
the warnings listed below are recommended to prevent possible interference with the control system 
of the powered vehicle. 
 

■ 

       WARNING! 

Electromagnetic interference (EMI) from sources such as radio and TV stations, amateur radio 
(HAM) transmitters, two-way radios, and cellular phones can affect powered vehicles and motorized 
scooter.  Following the warnings listed below should reduce the chance of unintended brake release or 
powered vehicle movement which could result in serious injury. 

1.

 

Do not operate hand-held 

(

transceivers-receivers), such as citizens band (CB) radios, or turn ON 

personal communication devices, such as cellular phones, while the powered vehicle is turned ON. 

2.

 

Be aware of nearby transmitters, such as radio or TV stations, and try to avoid coming close to them. 

3.

 

If unintended movement or brake release occurs, turn the powered vehicle OFF as soon as it is safe. 

4.

 

Be aware that adding accessories or components, or modifying the powered vehicle, may make it 
more susceptible to EMI (Note: There is no easy way to evaluate their effect on the overall immunity 
of the powered vehicle). 

5.

 

Report all incidents of unintended movement or brake release to the powered vehicle manufacturer, 
and note whether there is a source of EMI nearby. 

 

■ 

IMPORTANT INFORMATION 

1.

 

20 Volts per meter (V/m) is a generally achievable and useful immunity level against EMI (the higher 
the level, the greater the protection). 

2.

 

This product has an immunity level of 20 V/m without any accessories and connected to it. 

 
 
 
 
 
 
 
 
 
 

2.  SAFETY NOTICE 

Note:

 Other types of hand-held devices, such as cordless phones, laptop computers, AM/FM radios, TV 

sets, CD players, cassette players, and small appliances, such as electric shavers and hair dryers, so far as 
we know, are not likely to cause EMI problems to your powered vehicle. 

Summary of Contents for SPORTRIDER SR-XL3































Reviews: