background image

16

www.pridemobility.com

Quantum 600 Sport HD

User Positioning

Pride recommends that all users be seated in an upright position with their pelvis positioned as far rearward as

possible in the power chair seat. All users need to discuss pelvic positioning with their Quantum Rehab Dealer,

therapist(s) or healthcare professional to determine appropriate pelvic position when seated on the power chair

based on the user’s individual medical needs.

Prescription Drugs/Physical Limitations

Users must exercise care and common sense when operating a power chair. This includes awareness of safety

issues when taking prescribed or over-the-counter drugs or when the user has specific physical limitations.

WARNING! Consult your physician if you are taking prescribed or over-the-counter medication or

if you have certain physical limitations. Some medications and limitations may impair your

ability to operate your power chair in a safe manner.

Alcohol/Smoking

The power chair user must exercise care and common sense when operating his/her power chair. This includes

awareness of safety issues while under the influence of alcohol or while smoking.

WARNING! Do not operate your power chair while you are under the influence of alcohol, as this

may impair your ability to operate your power chair in a safe manner.

WARNING! Pride strongly recommends that you do not smoke cigarettes while seated in your

power chair, although the power chair has passed the necessary testing requirements for

cigarette smoking. You must adhere to the following safety guidelines if you decide to smoke

cigarettes while seated in your power chair.

„

Do not leave lit cigarettes unattended.

„

Keep ashtrays a safe distance from the seat cushions.

„

Always make sure cigarettes are completely extinguished before disposal.

Flammability Precautions

WARNING! Even though the plastics on your power chair have passed the applicable

flammability standards, Pride recommends that you do not expose your power chair to open

flames.

WARNING! Replace worn or damaged upholstery immediately to reduce the risk of fire hazard.

WARNING! Be aware that washing of upholstered items may reduce the resistence to

flammability of the fabric.

Electromagnetic and Radio Frequency Interference (EMI/RFI)

WARNING! Laboratory tests have shown that electromagnetic and radio frequency waves can

have an adverse effect on the performance of electrically-powered mobility vehicles.

Electromagnetic and Radio Frequency Interference can come from sources such as cellular phones, mobile two-

way radios (such as walkie-talkies), radio stations, TV stations, amateur radio (HAM) transmitters, wireless com-

puter links, microwave signals, paging transmitters and medium-range mobile transceivers used by emergency

vehicles. In some cases, these waves can cause unintended movement or damage to the control system. Every

electrically-powered mobility vehicle has an immunity (or resistance) to EMI. The higher the immunity level, the

greater the protection against EMI. This product has been tested and has passed at an immunity level of 20 V/m.

I I .   S A F E T Y

Summary of Contents for Quantum 600 Sport













































Reviews: