19
Pathrider 140 XL www.pridemobility.com
I I I . Y O U R S C O O T E R
Figure 4. Tiller Console Components
SPEED ADJUSTMENT DIAL
HORN BUTTON
BATTERY CONDITION METER
THROTTLE
CONTROL
LEVER
RIGHT TURN INDICATOR BUTTON
KEY SWITCH
THROTTLE
CONTROL
LEVER
HORN BUTTON
RIGHT TURN INDICATOR LED
LEFT TURN INDICATOR LED
LIGHTS SWITCH
HAZARD LIGHTS SWITCH
LEFT TURN INDICATOR BUTTON
TILLER ADJUSTMENT LEVER
HANDBRAKE
LEVER
STATUS LED
HI-LOW SWITCH
TILLER CONSOLE
The tiller console houses all of the controls needed to drive your scooter, including the speed adjustment
dial, key switch, hi-low switch, battery condition meter, horn buttons, turn indicator buttons, handbrake
lever, tiller adjustment lever, and the throttle control lever.
See figure 4
.
PROHIBITED! Do not expose the tiller console to moisture. In the event that the tiller
console does become exposed to moisture, do not attempt to operate your scooter until
the tiller console has dried thoroughly.
Speed Adjustment Dial
This dial allows you to preselect and limit your scooter’s top speed.
The image of the tortoise represents the slowest speed setting.
The image of the hare represents the fastest speed setting.
Key Switch
Insert the key into the key switch and turn it clockwise to power up (turn on) your scooter.
Turn the key anticlockwise to power down (turn off) your scooter.
WARNING! If the key is turned to the “off” position while your scooter is in motion, the
electronic brakes will engage and your scooter will come to an abrupt stop!
Battery Condition Meter
When the key is fully inserted and turned clockwise to power up your scooter, this meter indicates the
approximate battery voltage strength. For further information on battery charging, see IV. “Batteries and
Charging.”
