Pride Family Brands, INC. Outdoor Firepit
REV-5 02/07/12 5
Description
Qty.
Part Number
12” Fire Star SS Burner (used on Round Firepit)
1
STABURN12
18” HSS Burner (used on Rectangular Firepit)
1
LINBURN18
½” Flex Gas Line (28” length)
1
FLEXHOS0.5
Air Shutter Orifice LP #51”
1
AIRMIX51
Gas
Valve
(On/Off)
1 GASVALVE
Plastic Knob
1
GASKNOB
Glass
media
18lb
GLACOIR18
Round
Table
Top 1 TVCSF48
Rectangular
Table
Top
1 TVRSF3248
Firepit
Aluminum
Door
Knob
1 CCINBAR
1. The Firepit should be inspected and cleaned before initial use at least annually by a qualified field
service person.
2. Any component that is found faulty must be replaced with an approved component.
3. Any tampering or modifying with the Firepit is dangerous and voids all warranties.
4. During winter months in cold climates and various seasons, operation the Firepit may be affected
by weather conditions. It is recommended to use a ventilated cover over top of your Firepit to
protect it from humid/rainy weather conditions when not in use. Heavy rains/downpours could
affect the Firepit operation if not covered; if this occurs ensure you allow the Firepit time to dry out
before attempting to operate.
NOTE
: If a combustible type cover is used over the Firepit when
not in use be sure to remove it before operation to prevent a severe safety hazard.
5. Carbon (soot) may build up on the surface of glass during normal use. To clean, remove glass
and wash with water, dry and replace.
6. Over time stainless steel parts discolor when heated, usually a golden or brown hue. This
discoloration is normal and does not affect the performance of the appliance.
FIRE PIT MAINTENANCE
REPLACEMENT PARTS
