VV
22 | VV – Manual | AntecControls.com
Valve Pressure Switch (VPS)
Valve Pressure Switch (VPS) is an adjustable, pressure-actuated electrical switch that makes or breaks an electrical circuit at a
predetermined pressure.
Overview
See the VPS Product Submittal on AntecControls.com for specifications and dimensions.
Options
Installation
The VPS is provided factory installed when ordered with a Venturi Valve. For any field mounted applications, see instructions
below.
Valve Pressure Switch (VPS)
Model:
Features:
VPS
•
Factory set to actuate on a pressure rise of 0.30 in.w.c. for low pressure Venturi
Valves and 0.60 in.w.c. for medium pressure Venturi Valves
•
Adjustable setpoint range
STEP 1
Using self-tapping screws, mount the VPS to a location within the valve’s controls enclosure. Make sure there is adequate room around the VPS to make
the electrical connections and connect the pressure tubing.
STEP 2
Connect the pressure tubing from the Hi side of the Venturi Valve to the Hi port on the pressure switch.
STEP 3
Connect the pressure tubing from the Lo side of the Venturi Valve to the Lo port on the pressure switch.
STEP 4
Connect the NO or NC (depending on the application) and COM wires from the VPS to the device being used to monitor the valve pressure.
