manualshive.com logo in svg

PRG MBOX EXTREME, User Manual, Page: 6 / 136

Share
Download
PRG MBOX EXTREME User Manual Download Page 6

IV

MBOX EXTREME

®

 MEDIA SERVER USER MANUAL

Chapter 4.  Operation

Application Window

Starting the Mbox Extreme Application......................................................................................................................................  32
Overview .....................................................................................................................................................................................  32
Setup ..........................................................................................................................................................................................  33

Heads Up Displays (HUDs)

Using HUDs ................................................................................................................................................................................  38

Dual I/O Module

Overview .....................................................................................................................................................................................  39
Connected Display Devices and EDID .......................................................................................................................................  41
EDID Capture..............................................................................................................................................................................  42
SDI Output (SD - Standard Definition & HD - High Definition)....................................................................................................  43
Genlock (Generator Lock)...........................................................................................................................................................  45

Chapter 5.  Advanced Features

Objects and Digital Gobos

About 3D Models and Digital Gobos (Objects)...........................................................................................................................  48
Creating a Digital Gobo with Adobe Illustrator CS3 ...................................................................................................................  50
Animated Gobos.........................................................................................................................................................................  51

Animated Textures

About Animated Textures ...........................................................................................................................................................  55

Layer Copy

Using Layer Copy .......................................................................................................................................................................  56

Drawmodes

Using Drawmodes ......................................................................................................................................................................  57
Drawmode 16 - Orthographic View ............................................................................................................................................  58
The Stencil ..................................................................................................................................................................................  59
Layer Blending Modes................................................................................................................................................................  61

Decay

Decay Effect................................................................................................................................................................................  62

Fog

Fog Effect ...................................................................................................................................................................................  63

Text Files

Support for Text Files..................................................................................................................................................................  64

Audio Output

Audio Output Features................................................................................................................................................................  65

Synchronization

Timecode Synchronization (Timecode Sync Playmode) ............................................................................................................  67
Layer To Layer Synchronization..................................................................................................................................................  68

Alignment Rectangles

Using Alignment Rectangles.......................................................................................................................................................  69

Thumbnails

Creating Thumbnail Images........................................................................................................................................................  71

Effects and Transitions

Effects and Transitions with Additional Input Files .....................................................................................................................  72
Adding Custom Effects or Transitions ........................................................................................................................................  72

Summary of Contents for MBOX EXTREME









































































































































Reviews:

No comments