GROUNDCONTROL™ REMOTE FOLLOWSPOT SYSTEM™ USER MANUAL
25
Manual Control Menu
The Manual Control menu allows control of additional fixture
mechanisms (color, gobo, etc.) with the three encoders below the
touchscreen in order to create a "look" which can then be stored as
a preset.
The mechanism group buttons (CYM, Beam, etc.) select which
mechanisms are being controlled by the encoders. The encoder
functions are labeled in the green panel at the bottom of the menu.
For example, when Beam is selected, it will display Strobe, Edge,
and Frost. Depending on the type of fixture connected, a different
Manual Control menu will be displayed to allow control of that
fixture's features. Use the corresponding knobs on the Control Arm
to adjust the parameters as shown in
.
+
Store Preset - press this panel to open
.
.
Bad Boy Manual Control
Best Boy Manual Control
Figure 19: Mechanism Adjustment Knobs
