9
Scan Mode
•
Turn on the Scan Mode:
(1) Short press to turn on scan function, the default angle is 15°
(2) Short press again to turn off scan function.
•
Scan angle switch:
(1) Short press to switch the scan angle, followed by loop from
15°->30°->60°->15°.
(2) Short press to switch the scan angle, followed by loop from
15°->60°->30°->15°.
TILT function
TILT Operation and Reset
•
Press to turn on the instrument;
LED is blinking green when the instrument start to leveling.
Short press , the
TILT
LED will be solid green, the laser is glitter.
•
After Auto-leveling, the laser starts to rotate.
•
After Auto-leveling, if the instrument is tilted, it will be warning, the rotation will be
stopped, and the laser is kept bright.
TILT
LED is solid red.
•
Press again, the instrument will reset and enter TILT function again, and
re-leveling.
TILT Mode switch
•
Press to switch to Auto-leveling Mode in TILT Mode, TILT LED will be off.
Remark:
When the instrument is in Manual Mode, it can not switch to TILT
function; If necessary, please resume to Auto Mode.
Operation in Slope function
Horizontal Slope function:
•
First to turn on the Manual Mode after the instrument is powered on.
The is solid green, and the is solid red.
Short press to enter the slope function, the LED is solid green ,
it indicates the instrument is in X axis manual slope function.
Remark:
(In TILT Mode also need to enter the Manual Mode first, then press to enter the
slope mode).
•
/ can control the laser tilt along the X axis.