SET UP
OPERATION
7
Operation in Auto Mode
•
Press to turn on the instrument.
•
Green LED is blinking green when the instrument start to leveling.
TILT
LED is off (TILT Function is not on by default), the laser is glitter.
•
After leveling, the laser dot starts to rotate(the default speed is 300rpm),laser
is kept bright, Green LED and
TILT
LED are solid green.
•
The instrument will be warning when it is tilted, and rotating will be stopped, the
laser will be glitter,
TILT
LED is solid red. Press to reset.
•
Press to turn off the instrument.
Horizontal Position
•
Place laser tool down on its bottom.
Be sure surface is near level.
•
Press to power ON.
At Angle
•
Press to power ON. Press and hold to turn ON Mnual Mode. Laser tool can now
be positioned to various angles with auto-leveling mode OFF.
NOTE:
To change between horizontal and vertical positions the laser tool must be powered
OFF, repositioned, and then powered ON in the new position.
Vertical Position
•
Place laser tool down on its side,
handle facing up. Be sure surface
is near level.
•
Press to power ON.