SAFETY INSTRUCTIONS
Working safely with the measuring tool is possible only when the operating and
safety information are read completely and instructions contained herein are strictly
followed. Never make warning labels on the measuring tool unrecognizable.
SAVE THESE INSTRUCTIONS.
Caution
– The use of operating or adjusting equipment or the application or
processing methods other than those mentioned herein, can lead to hazardous
radiation exposure.
2
WARNING!
LASER RADIATION.
Do not stare into beam. Class II laser product.
Turn the laser beam on only when using this tool.
Do not remove or deface any product labels.
•
Avoid direct eye exposure. The laser beam can cause persons being blinded.
•
Do not operate the tool around children or allow children to operate the tool.
•
Do not place the tool in a position that may cause anyone to stare at the laser
beam, whether intentionally or unintentionally.
•
Do not use on reflecting surfaces such as sheet steel, glass or polished metal etc.
that have shiny, reflective surfaces. The shiny surface could reflect the beam back
at the operator.
•
Always turn the laser tool off when not in use. Leaving the tool on increases the risk
of someone inadvertently staring into the laser beam
•
Do not attempt to modify the performance of this laser device in any way. This may
result in a dangerous exposure to laser radiation.
•
Do not attempt to repair or disassemble the laser-measuring tool. If unqualified
persons attempt to repair this product, serious injury may occur. Any repair required
on this laser product should be performed only by qualified service personnel.
•
Use of other accessories that have been designed for use with other laser tools
could result in serious injury.
•
Do not operate the tool outdoors.
•
Do not place or store tool under extreme temperature conditions.
•
Do not operate the tool in explosive environments, such as in the presence of
flammable liquids, gases or dusts. Sparks can be created in the tool which may
ignite the dust or fumes.
Pav. < 1mW λ = 625-660nm tp > 70ps
IEC/EN 60825-1: 2014
