PREVOST X3-45 COACH Operator'S Manual Download Page 60

Page: 60 / 294

Press and hold the

SET

button until the desired

cruising speed is reached.

When the

SET

button is

released, the new cruising

speed will be stored in the

cruise control memory.or

2. Each brief pressing of the

SET

button will

decrease set cruising speed by 1 mph

(2 km/h).

CRUISE CONTROL BUTTONS

Setting at a desired speed

Accelerate the vehicle to the desired cruising

speed using the accelerator pedal. Press and

release the

SET

button then remove foot from

the accelerator pedal. This will set the vehicle
cruise speed and store it in memory. The set

speed will appear in the driver information

display.

Increasing set speed

The vehicle cruise speed setting can be in-

creased by one of the following methods.

1. Accelerate using the accelerator pedal until

the desired cruising speed is reached. Press

and release the

SET

button.

3. Slightly apply the service brake and when

desired cruise speed is reached, press and

release the

SET

button.

Canceling the preset speed

You can cancel the preset cruising speed by:

1. Pressing momentarily the

CANCEL

button;

2. Depressing the brake pedal.

Summary of Contents for X3-45 COACH







































































































































































































































































































Search results

Summary of Contents for X3-45 COACH

Reviews:

Related manuals for X3-45 COACH

Brands by name

Popular brands

PREVOST X3-45 COACH, Operator'S Manual

Search results

Summary of Contents for X3-45 COACH

Reviews:

Related manuals for X3-45 COACH

Brands by name

Popular brands