PREVOST LE MIRAGE XLII BUS SHELLS, Maintenance Manual

Page: 795 / 1260

Section 16: SUSPENSION
PA1564
35
14. TORQUE TABLE
TORQUE (DRY)
DESCRIPTION QTY
Lbf-ft Nm
Pitman Arm to Steering Gear Fixing Nut 1 470-570 637-773
Steering Gear to Mounting Bracket Bolts 5 365-405 495-550
Drag Link to Pitman Arm Stud Nut * 1 150-200 203-271
Drag Link to Bell crank Stud Nut *
1 150-200 203-271
Drag Link Socket End Clamp Bolt Nut 2 40-60 55-80
Relay Rod to Bell crank Stud Nut * 1 150-200 203-271
Relay Rod to Idler Arm Stud Nut * 1 150-200 203-271
Tie Rod to Bell crank Stud Nut *
1 150-200 203-271
Tie Rod to Idler Arm Stud Nut *
1 150-200 203-271
Tie Rod to Steering Arm Stud Nut *
2 150-200 203-271
Tie Rod End Clamp Bolt Nut 4 40-60 55-80
Steering Arm to Steering Knuckle Bolt (M20 X 65) 2 520-575 705-780
Steering Arm to Steering Knuckle bolt (M24 X 100) 2 751-830 1018-1125
Torque Rod Stud Nut 2 160-215 217-292
Torque Rod Mounting Bracket Stud 4 90-110 122-150
Torque Rod Mounting Bracket Nut 4 140-155 190-210
Idler Arm and Bell Crank Mounting Spindle Nut 8 90-105 122-142
Jacking Point Bracket Nut 8 70-80 95-110
Sway Bar Bushing Collar Nuts 8 80-100 110-135
Sway Bar Link Upper and Lower Nuts (Front Suspension) 2 165-200 225-270
Sway Bar Link Upper Nuts (Rear Suspension) 2 100-120 135-160
Sway Bar Link Lower Nuts (Rear Suspension) 2 70-80 95-110
Shock Absorber Pin 2 350-400 475-545
Shock Absorber Support 4 145-165 196-224
Shock Absorber Upper Mounting Pin Stud Nut 2 70-85 95-115
Shock Absorber Lower Mounting Pin Nut 2 60-75 81-102
Air Spring Lower Nut 4 20-25 27-34
Air Spring Upper Nut 2 20-25 27-34
Upper A-Arm Central Ball Joint (Hex Castle Nut) *
2 310-340 420-461
Upper A-Arm Ball Joint 8 230-255 312-346
Lower A-Arm Central Ball Joint (Hex Castle Nut) * 2 490-540 664-732
Lower A-Arm Ball Joint 8 270-300 366-407
*
Tighten nut to specified torque, then advance to next aligning cotter pin slot and install a new cotter pin.