manualshive.com logo in svg

PREVOST H 2018 Series, Operator'S Manual

The PREVOST H 2018 Series Operator's Manual is a comprehensive guide designed to assist users in operating and maintaining their product. This manual can be easily accessed and downloaded for free from our website, ensuring that users have the necessary information readily available.

Share
Download
background image

8

      

APPENDIX C – Allison Transmission’s Other Features  

 
1.  Bring the vehicle to a stop at a safe location. 

2.  Apply the parking brake. 

 

To display stored codes: 

1.  Simultaneously press the 

 (Upshift) and 

 (Downshift) arrow buttons five times (Prognostics 

enabled) to access the Diagnostic Display Mode. With Prognostics disabled, press the 

 (Upshift) 

and 

 (Downshift) arrow buttons twice. 

2.  Press the MODE button to read the next code in the queue, if any. 

 

To clear all active stored codes: 

While in Diagnostic Mode, clear all active codes by pressing and holding the MODE button for 
approximately three seconds until the MODE message flashes. Release the MODE button. The MODE 
message should not remain illuminated if the active DTC shown in the display has cleared.  

While in Diagnostic Mode, press and hold the MODE button for 10 seconds to clear both active codes 
and inactive codes. The MODE message flashes a second time indicating all codes are cleared from the 
queue. 

Exiting Diagnostic Mode 

Exit the diagnostic mode by one of the following methods: 

1.  Press simultaneously the   (Upshift) and 

 (Downshift) arrow buttons at the same time on the 

pushbutton shift selector. 

2.  Press any range button «D», «N» or «R» on the pushbutton shift selector. 

3.  After approximately 10 minutes of inactivity at the pushbutton shift selector, the diagnostic mode 

automatically exits and returns to normal operating mode. 

4.  Turn off power to the TCM (shut off the engine using the ignition key). 
 

NOTE 

Be sure to record all codes displayed before they are cleared. This is essential for troubleshooting.

 

 

NOTE 

If clearing a code while locked in a «D» (Drive) or «R» (Reverse) position (fail-to-range), the 
transmission will still be in «D» (Drive) or «R» (Reverse) when the clearing procedure is completed.  
«N» (Neutral) must be manually selected.

 

DIAGNOSTIC TROUBLE CODE RESPONSE 

The electronic control system is programmed to inform the operator of a problem with the transmission 
system via the CHECK light and shift selector display while it automatically takes action to protect the 
operator, vehicle, and transmission. When the Transmission Control Module (TCM) flags a Diagnostic 
Trouble Code (DTC) as active, the TCM may take a combination of diagnostic responses as listed in the 
table below. 

 

 

 

 

 

Summary of Contents for H 2018 Series



































































































































































































































































Reviews:

No comments

Related manuals for H 2018 Series

Astral Pool 57434 Manual preview
57434
Brand: Astral Pool Pages: 29
Volvo 9700 USCAN Operating Instructions Manual preview
9700 USCAN
Brand: Volvo Pages: 30

Brands by name

Popular brands

Load more brands