manualshive.com logo in svg

PREVOST H 2018 Series, Operator'S Manual

The PREVOST H 2018 Series Operator's Manual is a comprehensive guide designed to assist users in operating and maintaining their product. This manual can be easily accessed and downloaded for free from our website, ensuring that users have the necessary information readily available.

Share
Download
background image

7-14     SAFETY FEATURES AND EQUIPMENT 

 

PA1628 H3-41, H3-45 Operator’s Manual 

 

JACKING POINTS ON FRONT UNDERFRAME – I BEAM AXLE   
 

          

16183

 

 

 

JACKING POINTS ON FRONT UNDERFRAME – IFS   

16182 

 

 

JACKING POINTS ON REAR FRAME 

 

 

WARNING 

The suspension of the vehicle must be in 
the normal ride position before jacking. 

 

 

JACKING POINTS ON FRONT AXLE – I BEAM AXLE

 

10000 

 

 

JACKING POINTS ON FRONT AXLE - IFS 

16095 

 

 

JACKING POINTS ON DRIVE AXLE

 11005 

 

WARNING 

Always unload or retract the tag axle before 
jacking the vehicle from the front and drive 
axle jacking points to prevent damage to 
suspension components. 

 

 

JACKING POINTS ON TAG AXLE 

                                

 

11029 

 

Summary of Contents for H 2018 Series



































































































































































































































































Reviews:

No comments

Related manuals for H 2018 Series

Brands by name

Popular brands

Load more brands