Features
•
Six selectable control modes. Four modes provide independent switch operation; two
further modes provide co-operative switch operation.
•
Independent switch operation in Direct, Latched, Timed Minutes and Timed Seconds modes.
•
Co-operative switch operation in Co-Op and On/Off modes.
•
Up to three wireless switches and one wired switch may be connected to each channel.
•
Two 230V, 50Hz sockets.
•
Two 3.5mm switch input sockets.
•
Interference free operation at up to 10 metres distance with
SWITCH 125
and
SWITCH 75
.
•
Operates with wired or wireless switches; or a combination of both.
•
LEDs for pairing
SWITCH 125
and
SWITCH 75
and selecting control modes and time settings.
•
On-board memory retains the previous mode and time settings even after power-off.
Control Modes
•
DIRECT
: The appliance operates when
at least one switch is pressed and
deactivated when all switches are
released.
•
LATCHED
: pressing any switch turns the
appliance on, pressing any switch again
turns the appliance off*.
•
TIMED MINUTES
: allows the appliance to
operate for a preset period of time from 1
to 15 minutes. Subsequent presses of any
switch do not extend the timer period.
•
TIMED SECONDS
: allows the appliance to
operate for a preset period of time from
4 seconds to 40 seconds. Subsequent
presses of any switch do not extend the
timer period.
•
CO-OP
(requires at least one switch to
be paired/connected to both channels).
Both appliances operate when at least
one switch on each channel are pressed
simultaneously. Both appliances cease
operating whenever all switches are
released on either channel.
•
ON/OFF
(requires at least one switch to
be paired/connected to both channels).
Both appliances operate when at least
one channel 1 switch is pressed and both
cease operating when at least one channel
2 switch is pressed.
* Some toys may incorporate a Latched Mod In
this case we recommend you turn off Latched
Mode on
CONTROL PRO
.
Quick Set -Up
1 Plug the
ENERGISE
cable into any
standard mains socket.
2 Plug appliance(s) into the appliance
socket(s) [1]/[2] and turn the appliance(s)
on.
3 Either attach any wired switch into the
corresponding socket(s) [9]/[10] at the
side of
ENERGISE
or, to operate with
wireless switches, pair
SWITCH 125
or
SWITCH 75
to
ENERGISE
.
4 Press and hold the switch(es) and the
appliance(s) will operate.
Summary of Contents for Simplyworks ENERGISE
Page 4: ...1 2 3 4 5 6 7 8 9 10 ...
