Unpacking
Carefully unpack the box, which should contain the following
n-ABLER unit
USB to PS/2 adaptor plug
Instruction booklet
Warranty card
Installation
Ensure your computer is fully turned-off and not just in sleep
mode. Locate the relevant socket (PS/2 or USB) on your
computer and plug in your
n-ABLER
. Make sure the connector is
correctly orientated. Do not force the connector into its socket as
you may bend the pins.
If you are using the PS/2 socket on your computer you will need
the adaptor plug supplied with your
n-ABLER
.
When you switch on the computer your
n-ABLER
automatically
configures itself to either PS/2 or USB operation. Once you boot-
up the computer the
n-ABLER
is ready to use. There are no
driver files to be loaded- the computer’s resident drivers are
used to help simplify installation.
Roll the ball briefly to ensure the cursor responds to movement.
If not refer to the troubleshooting guide on our website
http://www.pretorianuk.com/n-abler
, clicking on ‘Frequently
Asked Questions’.
Compatibility
The
n-ABLER
works with PS/2 and USB compatible computers.
This includes the majority of Personal Computers (PCs) and
Apple Macintosh computers. PS/2 sockets are circular with 6
pins, whereas USB connectors are rectangular with 4 pins.
!
Cut off and k
eep f
o
r r
e
fe
renc
e
If any items are missing please
contact your supplier immediately
n-ABLER (trackball) 2010 leaflet:n-ABLER leaflet 14/4/10 16:57 Page 7
