www.pretorianuk.com
Unit 37 Corringham Road Industrial Estate
Gainsborough Lincolnshire DN21 1QB UK
Tel +44 (0) 1427 678990 Fax +44 (0) 1427 678992
Warranty
Your
KINETIC
is warranted against defects in manufacture and component failure. The unit is designed
for domestic and educational applications only. Use outside these areas will invalidate the warranty.
Unauthorised repair or modification, mechanical abuse, immersion in any liquid or connection to
incompatible equipment will also invalidate the warranty.
S040100
The Apple brand name and iOS trademark are used for
identification purposes only and are acknowledged.
Troubleshooting
In your
KINETIC
doesn’t operate correctly please use the following guide to determine the cause. If, after
following this guide, your unit still does not operate as you expect, please contact your supplier or email
Pretorian for support before returning it.
Disposal of batteries is often subject to local laws. Please consult your local authorities for information
relating to your locale. Never dispose of a battery in fire.
Symptom
Possible Cause/ Remedy
My
KINETIC
is not discoverable on my
iPad.
• Ensure battery is charged
• Ensure unit is awake by pressing Power button
• Unit may be connected to another iPad which is in range. Use ‘forget this
device’ in Bluetooth menu of the device to which it is connected to make
unit available again.
My
KINETIC
has been connected to this
iPad but won’t connect now.
• Re-connection should be automatic but if
KINETIC
has been paired with
another iPad in the meantime, the connection is lost. Use ‘forget this
device’ and then re-connect.
I am using
KINETIC
in Dice Activity but
all the messages are in the wrong order.
• The unit has not been inserted into the soft play cube in the correct
orientation. Refer to the orientation guide on the front panel of
KINETIC
and ensure that the visual prompts correspond to each of the faces 1-6.
I am using
KINETIC
in Find-Me or Find-
Me-Sequence Activity but the unit
triggers on the wrong face.
• The unit has not been inserted into the soft play cube in the correct
orientation. Refer to the orientation guide on the front panel of KINETIC
and ensure that the visual prompts correspond to each of the faces 1-6.
I am using
KINETIC
in Dice-as-a-
Switch/ Tilt/ Tap Activity but nothing
happens when the unit is triggered.
• The Function is not set correctly for the task you wish the unit to carry
out. Please refer to ‘Setting the Function’ for more details.
Sometimes my
KINETIC
isn’t triggered
when the soft play cube is turned onto
a new face.
• Ensure that the surface that the soft play cube rests upon is flat. If the
cube remains tilted when resting on the surface, it may be unable to
detect that its status has changed.
I’m using Tap Activity but sometimes
the unit doesn’t trigger when tapped.
• Try to increase the mechanical ‘coupling’ between the tap source and
the unit by reducing the amount of padding in the cushion or using
stiffer padding.
