8
6.
Front Electronics Board Setup
The Horns can be setup to work in one of the follows options :
Controller alarms, Tiller push button , Reverse alarm , Blinkers
alarms.
The front board include setup options for the Horn. This can be
done with the dipswitch DSW1 that is on the front board.
Deep switch :
User Modes setup with relate to user needs.
Dip Switches Setup is as follows
: (Shown the Default Set Up)
State
Description
"1" = Off
Horn while blinker or hazard are on .
"2" = On
Horn while derive backward
"3" = Off
When the battery too low – the scooter stop.
"4" =
No use.
Diagram sketch :
"
1
"
"
2
"
"3"
Summary of Contents for BREEZE-C
Page 23: ...23 13 General Wiring diagram ...
