background image

PRESTO OWNER’S MANUAL        

 Page 11

          POWER STAK 

DAILY OPERATOR CHECK LIST

 

CHARGE CONDITION/BATTERY CHECK LIST 

1.  Check Battery Discharge Indicator (Fuel Gage and Hour Meter) – Be sure unit is 

showing 

proper Charge Level

 before operating unit

2.  Check to be sure 

Charging Cord

 is 

Unplugged

 and properly stowed before operat-

ing unit

3.  Inspect Battery Wire Connections – All connections should be tight with 

No Corro-

sion 

(white powder) showing at the 

Battery Terminals

4.  Inspect Battery Case – There should be 

no cracks or visible damage

 to the 

Battery 

Case

WALK AROUND INSPECTION

1.  Check general condition of Stacker (loose or broken parts, oil, dangling wires, dents, 

cracked covers etc.)

2.  Check metal frame, mast, carriage and font load supports for cracked welds, worn or 

flat rollers, loose or disconnected chains, loose pins, missing snap rings, and loose or 

missing hardware – bolts, nuts washers etc.

3.  Check for evidence of hydraulic leaks

4.  Make sure all precautionary labeling is in place and legible

FUNCTIONAL INSPECTION

1.  Check Drive – Forward and Reverse Function

2.  Check Lift – Up and Down Function

3.  Check Function for Belly Button Reverse 

4.  Check Horn Function

5.  Check Brake Function

OPERATOR 

ID 

    DATE

DO NOT USE OR OPERATE STACKER IF ANY FUNCTION IS NOT

OPERATING PROPERLY OR IF STACKER APPEARS UNSAFE IN ANYWAY

REPORT CONCERNS TO SUPERVISOR IMMEDIATELY!

Summary of Contents for Power Stak PPS2200-62NFO-21
































Reviews: