background image

20

      PRESTO P4 LEVEL LOADER OWNER’S MANUAL

Presto Lifts Limited Warranty Policy

Presto Lifts warrants all of its products against defects in the welded structural frame and, if
applicable, scissor legs from faulty material and workmanship for a period of five (5) years from
the date of invoice.

A lifetime limited warranty is provided for the Airstroke Actuator

TM

 in all pneumatic lifts against any

defect due to faulty material or workmanship.

All batteries are covered under a separate limited warranty from the battery manufacturer for a
period of one year from the date of invoice.

All other components have a limited warranty against defects in faulty material and workmanship
for a two (2) year period from the date of invoice and 30 day limited warranty on labor. Please
note that prior authorization from Presto Lifts is required on all warranty work.

There are no implied warranties of any kind, more specifically, there are no warranties of mer-
chantability or fitness for any particular purpose. Presto Lifts' sole warranty shall be as set forth in
this limited warranty.

Presto Lifts will elect to repair or replace a defective component without charge, if any compo-
nents should become defective within the limited warranty period. Proof of purchase is required
for warranty. The charge for shipping the defective component is the responsibility of the buyer
and must be accompanied with an RMA number. The shipping charge to return the component to
the buyer is the responsibility of Presto Lifts, Inc.

This limited warranty does not cover labor expense for removal or reinstallation of components
after thirty days. This limited warranty shall not cover, among other things: damages resulting from
foreign matter or water, failure to provide reasonable and necessary maintenance, and if appli-
cable, use of product while charger is plugged into an AC outlet, or failure to follow operating
instructions. The limited warranty is not valid for damage resulting from negligence, accident,
unreasonable use, abuse or misuse, exceeding data plate capacities or altering the product without
Presto Lifts authorization.

Presto Lifts expressly disclaims and excludes any liability for consequential, incidental, indirect or
punitive damages or financial loss to people or property resulting from any breach of warranty or
the operation or failure of this product.

Presto Lifts makes no representation that this product complies with local, state, or federal safety/
product standards codes. Should this product fail to comply in any way with those codes, it shall
not be considered a defect of materials or workmanship. Presto Lifts shall not be held liable for
any damages resulting from noncompliance. It is the dealer's responsibility to exercise this limited
warranty. This limited warranty is provided to the original purchaser (defined as the original end
user) and is nontransferable. This constitutes the complete and final agreement involving Presto
Lifts and limited warranty obligations for products.

Summary of Contents for P4





















Reviews: