background image

2

      PRESTO P4 LEVEL LOADER OWNER’S MANUAL

INTRODUCTION

The P4 Level Loader is designed to allow faster, safer, and easier pallet loading and

unloading. Pallets may be loaded or unloaded in a single step, using a fork truck, or

hand pallet truck. Using a pushbutton or footswitch control, the operator can position

boxes or containers at a convenient working height. This allows workers to load or

unload without bending or stretching.

The unit includes a photo eye toe guard feature. A photo eye is positioned near the

front of the unit. If the operator’s toes block this photo eye, the unit stops immediately.

This manual contains instructions on the safe and proper installation, use, and

maintenance of a P4 Level Loader. Please be sure that this manual is available to

anyone who uses or services the P4 unit. Be sure that everyone who uses the P4 unit

has read this manual.

P4 Level Loaders may be used in a wide variety of industrial settings. The

instructions included in this manual are not necessarily all-inclusive, because

Presto Lifts cannot anticipate all conceivable or unique situations.

In the interest of safety, please read this whole manual carefully. Please

understand the material in the manual before you install, use, or service the P4

unit. If you have any questions about the instructions in this manual, please

contact your dealer or Presto Lifts Inc.

Presto Lift’s product warranty is shown on the rear cover of this manual. This instruction

manual is 

not intended to be or to create any other warranty, express or implied,

including any implied warranty of merchantability or fitness for a particular

purpose, all of which are hereby expressly excluded.

 As set forth more specifically

in the product warranty, Presto Lift’s obligation under that warranty is 

limited

 to the

repair or replacement of defective components, which shall be the buyer’s 

sole remedy,

and Presto Lift shall not be liable for any loss, injury, or damage to persons or property,

nor for any direct, indirect, or consequential damage of any kind resulting from the P4

Level Loader.

Summary of Contents for P4





















Reviews: