![background image](http://html1.mh-extra.com/html/presto/ecoa-htt-series/ecoa-htt-series_installation-operation-and-service-manual_1599278014.webp)
Page 14
— OWNER’S MANUAL: TT & WT and ECOA HTT & HUE Series
Figure 4: Electrical Schematic Pump Unit 1 Phase 208, 240 Volts AC
Table 1 – Hydraulic Oil Specifications
If the lift will be used at normal ambient temperatures, Presto-ECOA Lifts supplies the unit with Conoco Super
Hydraulic 32 oil. This may be replaced by any other good quality oil with 150 SSU at 100° F and rust and
oxidation inhibitors and anti-wear properties.
If the lift will be used at ambient temperatures below 0°F, use aircraft hydraulic oil. Use Type 15 aircraft hydraulic
oil.
The following are equivalent to Conoco Super Hydraulic 32:
TYPE
MANUFACTURER
AW32 ................................. CITGO
DTE 24 ............................. EXXON/MOBIL
NUTO H32 ........................ EXXON/MOBIL
AMOCO AW32 .................. CHEVRON (AMOCO CO.)
CAUTION!
It is very important to keep the hydraulic oil free of dirt,
dust, metal chips, water, and other contamination.
Most of the problems with hydraulic systems are caused by contamination in the oil.