Presto Lifts SizzrDok HLD, Installation, Operation And Service Manual

Page: 7 / 26

HLD-SLD PRESTO-ECOA OWNER’S MANUAL 7
WARNING!
1. The SizzrDok loading dock is designed for use with stable, uniformly distributed loads on a
solid level floor. DO NOT concentrate the load at one point on the pallet or platform. ALWAYS uni -
formly distribute the load over the supporting surface. DO NOT use the dock lift for any purpose
other than its intended use.
2.
SHEARING HAZARD
. ALWAYS keep hands and feet clear of the scissor mechanism and all
moving components. DO NOT put hands or feet under the lift platform when in use. SEVERE
PERSONAL INJURY could result.
3.
CRUSHING HAZARD.
ALWAYS keep hands and feet clear of all moving components. DO
NOT put feet in the pit or on the base frame when in use. SEVERE PERSONAL INJURY could
result.
4.
PINCH POINT HAZARD.
ALWAYS keep hands and feet clear of the underside of the lift plat-
form and bridge plate. SEVERE PERSONAL INJURY could result.
5.
ALWAYS
ensure the handrails and safety chains are in place and secure BEFORE lifting
personnel. ALWAYS use a handrail to maintain balance while raising or lowering the lift. SEVERE
PERSONAL INJURY could result.
6.
NEVER
leave the loaded dock lift unattended unless the lift platform is in the fully lowered
position.
7. ALL lift servicing must be performed by qualified personnel. Unauthorized modifications to
this dock lift may compromise the performance and safety of the system. UNDER NO CIRCUM-
STANCES should you attempt any repair or service that is not covered in the service manual or
authorized by Presto-ECOA.
8.
ALWAYS
ensure all safety warning labels are in place and legible. If not, remove the dock lift
from service and replace the required labels.
9.
ALWAYS
securely anchor the base frame to the floor to ensure maximum stability and the
proper operation of the lift
CAUTION!
1.
DO NOT
continue to operate the hydraulic pump if a squealing noise is heard coming from
the pump. The pressure relief valve is operating. Continued operation of the pump with the relief
valve operating will cause permanent damage to the pump.
2.
DO NOT
change the relief valve setting. The relief valve is installed to protect the operator and
the lift.