P3 ALL AROUND - PRESTO PALLET POSITIONER
13
Figure 7. Moving the P3
Figure 6. Unloading with a Fork Lift
Unloading with a Fork Lift
Moving the P3 All Around Pallet Positioner
CAUTION!
Do not move the P3 while it is loaded. This
will damage the base frame of the unit. The
pockets on the base frame are designed to
support an unloaded P3, but cannot support
any extra weight.
1.
Remove any load from the top of the P3.
2.
Insert the forks into the pockets in the base
frame. See Figure 7.
Loading with a Fork Lift
1. Place the load on the lift, then lower the fork lift.
Before removing the load, be sure the unit is carrying
the weight, not the fork lift. See Figure 5.
/RZHUWKHORDGXQWLOWKHDLUEDJRQWKH3LVIXOO\
compressed.
%HVXUHWKHIRUNVRQWKHOLIWDUHFOHDURIWKHLQVLGH
of the pallet.
WARNING!
If you skip these steps, the load may drop
suddenly when you remove the fork lift.
You may be hurt or the unit or load may be
damaged.
WARNING!
Never drop the load on the turntable. If you
do this while the turntable is moving, the
load may shift. You may be injured or the
unit may be damaged.
2. Be sure the load is centered on the turntable.
Figure 5. Loading with a Fork Lift
WARNING!
If the load is off-center, it may shift when the
turntable is turned. You may be hurt or the
unit or load may be damaged.
1. Insert the forks into the pallet, and lift the pallet
clear of the top of the unit. See Figure 6.
%HVXUHWKHSDOOHWFOHDUVWKHWRSRIWKHWXUQWDEOH
before you move the fork lift.
WARNING!
If you skip these steps, the unit may jump
up suddenly when you remove the pallet.
You may be hurt or the unit or load may be
damaged.
