![background image](http://html1.mh-extra.com/html/presto-lifts/ecoa-series/ecoa-series_owners-manual_1599363010.webp)
Presto Lifts
P4 Manual
10
6. Carefully move the machine to the desired location.
This machine may be operated without being anchored. If anchoring the machine is
desired:
1. With the machine in the desired position mark the anchor holes located at each corner of
the machine.
2. Move the machine and drill holes for the anchors.
3. Move the machine back into position and anchor the machine using appropriate anchors.
Once the machine has been positioned plug the machine in, lower the platform to the fully lowered
position and remove the two bolts. These bolts can be stowed in the holes in the center vertical
post on the outside of the side panels.
The two bolts must be removed before attempting operate the machine
or the machine may be damaged.
5. Operation
Crush, pinch, and shear points exist; keep hands, feet, and loose
clothing away from machine during operation.
Do not enter beneath the platform.
Verify the area around the machine is clear of debris and/ or personnel
before operating.
The two bolts used to relocate the machine must be removed before
operating the machine or the machine may be damaged.
Only trained and/ or qualified personnel shall operate this machine.
Personnel operating this machine must read and understand this
manual.
Do not sit, stand, or ride on platform.
Before each use, inspect the machine for excessive wear or damage. Verify all precautionary
labeling is legible. Verify the photo eye across the load opening is functioning correctly by placing
an object in the path of the light and attempting to raise and lower the platform. The platform must
not lower or raise if the photo eye is obstructed.
BOLTS USED TO LIFT THE
MACHINE THREADED INTO
VERTICAL POST ON INSIDE OF
SIDE PANELS (BOTH SIDES)
ANCHORING POINTS
EACH CORNER.
BOLTS CAN BE STOWED IN THE
HOLES ON THE OUTSIDE OF
THE VERTCAL CENTER POST