Prestigio Signore 153 Technical & Service Manual Download Page 55

Page: 55 / 120

Boot Options

Users can press F12 during POST to enter the Boot Options Menu. In this menu users can change boot
device without entering BIOS SETUP utility.

NOTE:

There are four priorities that can let the user to specify the boot device sequence.

The priority of options from top to bottom is 1

, 2

, 3

rd and

If the Removable Device or Hard Drive option has multi devices, show ‘+’ in front of option and show each
device information.

If Network Boot ROM exists, users can also choose it to boot.

Help

: Keys used to view or configure devices:

> expands or collapses devices with a + or -

>and <

> moves the device up and or down.

TECHNICAL SERVICE MANUAL

Prestigio Signore 153

Summary of Contents for Signore 153

























































































































Search results

Summary of Contents for Signore 153

Reviews:

Related manuals for Signore 153

Brands by name

Popular brands

Prestigio Signore 153, Technical & Service Manual

Search results

Summary of Contents for Signore 153

Reviews:

Related manuals for Signore 153

Brands by name

Popular brands