background image

System Security

The System Security screen contains parameters that help safeguard and protect your computer from 
unauthorized use.

The following table describes the parameters in this screen. Settings in 

boldface

 are the default and 

suggested parameter settings.

Parameter

Description

Options

Set Supervisor Password

While entering SETUP, BIOS need to request user to enter 
supervisor password if set.
This password protects the BIOS SETUP menu from 
unauthorized modification.

Help

:  Supervisor Password controls accessing the whole 

setup utility.  It can be used to boot up when Password on 
boot is enabled.  

Enter

 

Set User Password

During POST, BIOS need to check user password if set.
This password protects the system from unauthorized user 
entry before OS boots up.

Help

:  User Password controls accessing part of the setup 

utility.  It can be used to boot up when Password on boot is 
enabled.

Enter

Password on boot

Enable or disable password entry on boot up.

Disabled 

Enabled 

TECHNICAL SERVICE MANUAL

Prestigio Signore 153

44

Summary of Contents for Signore 153

























































































































Reviews: