Prestigio P577, Manual

Page: 12 / 96

12 PRESTIGIO P577 / PRESTIGIO P597
ENG
Problem Possible solution
Size, position, shape or Check that the signal cable connector is properly connected and that the connection
quality unsatisfactory pins are not bent or damaged. Try another color temperature.
Duplicated images Adjust the picture characteristics as described in the section OSD Adjustment.
Image is not stable A problem with your graphics adapter or display unit. Contact your service
representative.
Check that the display resolution and frequency from your PC or graphic adapter is an
available mode for your monitor. In your PC, you can check through Control panel,
Display, Settings.
If the setting is not correct, use your computer utility program to change the display
settings.
Message : No signal Check that the signal cabel connector is properly connected and that the connection
pins are not bent or damaged.
If the connector is loose, tighten the connector’s screws. Check that the computer is
switched on.
To enter a power saving mode. You can reactivate the system by pressing any key or
moving the mouse.
The power LED is a red color LED Indicator can be orange color on changeing of video mode or Input Signal
(D-sub/DVI).
Check the Resolution and the frequency on the video part of your computer. Compare
these values with the data in the Preset Timing Table.
Contacting service
If the above troubleshooting hints do not help you find a solution to the problem, contact an authorized service agent.
If the monitor is sent for service, use the original package if possible.
Unplug the display unit from the power outlet and contact a service agent when:
• The monitor does not operate normally according to the operating instructions.
• The monitor exhibits a distinct change in performance.
• The monitor has been dropped or the cabinet has been damaged.
• The monitor has been exposed to rain, or water or liquid has been spilled onto the monitor.