Prestigio P577, Manual

Page: 11 / 96

11 PRESTIGIO P577 / PRESTIGIO P597
ENG
B. Hot Key :
a. That could push the “ Adj +” or “UP” key to switch the mode of audio mute.
b. That could push the “ Adj -” or “DOWN ” key to adjust the volume of audio output.
c. If the monitor is no signal input, and the same time, to push the “Power on/off” key keep 5 seconds, that could into the
burn-in mode, until the signal input is on.
Display power management
Reducing power consumption
If the power management function of your computer is enabled, your monitor turns on and off automatically. You can
control power management features from your computer.
Your computer may have power management features which enable the computer or moni-tor to enter a power saving
mode when the system is idle. You can reactivate the system by pressing any key or moving the mouse.
Mode LED Power consumption
Normal Green 40 W (Typ)
Off Red < 5 W (Typ)
Unplugged Not illuminated 0 W
The power button does not disconnect the monitor from the mains.
The only way to isolate the monitor completely from the mains supply is to unplug the mains
cable.
Troubleshooting
If your monitor is not functioning properly, you may be able to solve the problem by fol-lowing the suggestions below:
Problem Possible solution
Blank screen If the power LED is not lit, push the Soft power switch or check the AC cord to turn the
monitor on. If the display unit is powered through the computer, check that the
computer is switched on.
The PC might be in standby mode. Push one of the keyboard keys. Check that
the keyboard is properly con-nected to the computer.
Check that the signal cable connector is properly connected and that the connection
pins are not bent or damaged. If the connector is loose, tighten the connector’s screws.
Error message: Check that the power cable is correctly connected to the display unit and to the power
Video mode not supported outlet.
The display does not enter power Check the resolution and the frequency on the video port of your computer.
management mode Compare these values with the data in the Preset Timing Table.
Color defects The video signal from the computer does not comply with VESA DPMS standard.
Either the computer or the graphics adapter is not using the VESA DPMS power
management function.