16
Prestigio P260DVD-X P420DVD-X
ENG
Changing Channel
1. Using the CHANNEL buttons. Press the PROG /\ / \/buttons to change channels. You will see all the channels that the TV has
memorized. (The TV must have memorized at least three channels.)
2. Using the NUMBER buttons
- To change to single-digit channels (0~9) faster, press “0” before the single digit. Example: For channel 4, press “0”, then “4”.
- To select a channel over 10, press the -/-- button first. Example: For channel 42, press “-/--”, then “4”, then “2”.
3. Using the Previous Channel. Press the PRE button on the remote control. The TV changed to the last channels to the last channel
you were watching.
When the Picture Quality is Poor or Unstable
Use fine tuning to adjust a particular channel for better picture quality when noise interferes, color quality is poor, or the screen is
unstable.
1. Select the channel to tune using the numeric or channel buttons.
2. Press the TV.MENU button. The OSD MENU will be displayed.
3. Select SETUP using the /\ / \/ button.
4. Select MANUAL PROGRAM using the /\ / \/ button and then press the > button.
5. Select FINE TUNE using the /\ / \/ button and then press the </>button to fine tune.
If you are unable to fine-tune a channel, check that the SYSTEM settings are correct.
6. Select STORE using the /\ / \/ button and then press the > button.
7. Press the EXIT button to exit the menu.
Selecting the Picture Status
You can select a video mode from among USER, STANDARD, DYNAMIC, or MILD mode according to your personal preference.
QUICK!
Press the P.STD button. Whenever you press this button, PICTURE STATUS changes to
STANDARD >DYNAMIC >MILD >USER mode, in this order.
1. Press the TV.MENU button. The OSD MENU will be displayed.
2. Select PICTURE using the </> button.
3. Select the desired PICTURE STATUS using the </> button. Whenever you press this button, PICTURE STATUS changes to
STANDARD >DYNAMIC >MILD >USER mode, in this order.
4. Press the EXIT button to exit the menu.
