7
Ray 7R Moving Beam – User manual
The lights can be placed on the ground or installed on a truss or on the c
eiling/wall.
Caution:
1.
Before installation, ensure the clamps and drawbridges
and ceiling/truss
are good
enough to withstand 10 t
ime the weight of the equipment and other accessories
2.
Fasten the clamps and drawbridge with the M12 screw and nuts.
3.
Secure th
e drawbridge to the light base by screwing the fastener clockwise.
4.
If the truss can go up and down, the device can be directly clamped from the flight
box. When the equipment is lifted up, place the obstacles underneath the work
area.
5.
Secure the fixture wi
th a safety rope and ensure that it can withstand 10 time the
weight of the lamp.
6.
Verify that is nothing combustible within 1 meter of the fixture
7.
Unlock the protection lock after the installation to avoid damaging the fixture
DEVICE POWER
Fuse:
Power supply
Fuse
200-250V
5A ( main fuse)
100-120V
7A
（
main fuse
）
