19
USING THE TOP AND THE BOTTOM
OVEN FOR THE FIRST TIME
– Hang up the wire racks on the oven
walls (Fig. 5.1-5.2).
– Slide in, on the guides, the shelf and
the tray etc. fig. 5.3.
The rack must be fitted so that the
safety catch, which stops it sliding out,
faces the inside of the oven (fig. 5.3).
– To dismantle, operate in reverse order.
Fig. 5.3
Fig. 5.1
Fig. 5.2
NOTE:
– To eliminate traces of grease from the
heating elements, switch the ovens
on, to the maximum temperature in
this ways:
For 60 minutes in the
position, for
30 minutes in the
position (bottom
oven only), and for another 15 min-
utes in the
position.
– Switch off the electrical supply to the
appliance then clean the inside of the
two ovens when cool with a cloth
soaked in water and neutral detergent
and dry thoroughly.
19
USING THE TOP AND THE BOTTOM
OVEN FOR THE FIRST TIME
– Hang up the wire racks on the oven
walls (Fig. 5.1-5.2).
– Slide in, on the guides, the shelf and
the tray etc. fig. 5.3.
The rack must be fitted so that the
safety catch, which stops it sliding out,
faces the inside of the oven (fig. 5.3).
– To dismantle, operate in reverse order.
Fig. 5.3
Fig. 5.1
Fig. 5.2
NOTE:
– To eliminate traces of grease from the
heating elements, switch the ovens
on, to the maximum temperature in
this ways:
For 60 minutes in the
position, for
30 minutes in the
position (bottom
oven only), and for another 15 min-
utes in the
position.
– Switch off the electrical supply to the
appliance then clean the inside of the
two ovens when cool with a cloth
soaked in water and neutral detergent
and dry thoroughly.
