8
SAVE THESE INSTRUCTIONS - FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS - FOR HOUSEHOLD USE ONLY
9
•
Fill the pot with products and water so that the combined level is between marks MIN and MAX.
For products which expand during cooking the maximum level should be below the MAX line.
Do not overfill the inner pot. Do not fill above the MAX line.
CAUTION! Never cook with no water or any liquid. Liquid volume should always be at least the
MIN level.
•
Plug in the pressure cooker, the LED panel will display “0000”
MAX
MIN
•
Remove all packing materials. Remove
the sticker holding down the pressure
release valve.
•
Ensure all components are present and
not damaged.
•
Pour 3.5 litres of water into the pressure
cooker and start programme “Stew” close
the pressure release valve and “Steam”
for 30 minutes. Clean the inner pot and
any water on the lid and outer pot. This is
to ensure that the inner valves and lid are
thoroughly clean before use.
•
Before first use please wash the inner pot, steamer, cup and spoon in warm soapy water. Be
careful not to use metal utensils as this will scratch and remove the non-stick surface.
•
To open the lid, turn the lid handle in a
clockwise direction
and lift up. Be careful not to catch
the inner pot when lifting up the lid.
•
Due to expansion during cooking the lid may stick, in this case gently twist and lift off.
•
Before cooking please ensure that the heating plate and the inside of the outer pot are clean
and free from food debris.
•
Place the inner pot inside,
align the arrow labels
and close the lid by
turning it anti-clockwise
until it clicks and locks.
•
NEVER COOK WITHOUT THE INNER POT. DO NOT PUT WATER IN THE OUTER POT.
•
Refer to video instructions which can be found at www.pressurekingpro.co.uk
General Operating Instructions
Before First use
Operating Instructions
CLOSE
ALIGN ARROWS
WHEN PLACING LID
PRESSURE MODE WILL ONLY OPERATE
WHEN THE LID IS CLOSED CORRECTLY
•
Once BROWNING is complete
press CANCEL.
•
If you require more cooking time
press the function again.
LID OFF Browning Mode
•
BROWNING function will flash and will only operate for 3 minutes.
•
To start BROWNING press the BROWNING function button, the LED will display “UNLC”, this will be
followed by the 3-minute countdown shown as “00:03” in the LED display.
