Water Tank
Pressure Button
Score Tracker
Ball
Release Ramp
Flippers
Ball
Sprayer
Hand Grip
FIGURE 2
FIGURE 1
FIGURE 3
FIGURE 4
FIGURE 5
FIGURE 6
Target
SET UP:
1. Remove the caps covering each of the water tanks
and carefully pour water into each tank opening,
stopping when the water hits just below the inner rim
of the tank (Fig. 1).
2. Replace both tank caps.
3. Set both score trackers to
zero (Fig. 2).
PLAYING:
Players sit across from one another, with one
player at each end of the gameboard.
To begin the game, each player should press the
pressure button located next to his/her score
tracker (Fig. 3).
The youngest player starts by placing a ball on one of
the release ramps (Fig. 4) and allowing the marble to
fall onto the gameboard. Players take turns, releasing
the balls on each new round.
Both players place their hands on the hand grips and
squeeze the grips back toward them to operate the
flippers on the gameboard (Fig. 5).
When the ball touches the flippers,
the player on that side of the
gameboard should quickly squeeze
the hand grips to send the ball
down the alley toward his/her
opponent’s target.
If the ball hits a target, it will activate the mist and
spray the player on that side of the gameboard.
The player who hit the target scores one point and
moves his/her score tracker one space (Fig. 6).
To reset the game and begin the next round,
press the pressure buttons on both ends of
the gameboard.
WINNING:
The first player to score 5 points, wins.
CONTENTS:
• Game Unit
• 2 Balls
