22
en
Table bearing brackets
Check the two bearing brackets
for wear and tear. Tighten
the 8 bolts if necessary. If the
brackets are damaged, they
must be replaced.
Safety rail
Check that the safety rail lock
engages correctly. Tighten the
screws if necesseary.
If the safety rail is damaged, it
must be replaced.
Actuator
The actuator might need
replacement after 3-5 years
of using the product. Refer to
installation manual T5256.
Table top
Check that the table top is
level. If not, tighten or loosen
the adjustment screws. The
two adjusting screws must be
in the same position.
③
5
④
5
⑤
5
