O V E R V I E W
7
control with the outer ring for threshold set and the inner knob for
ratio adjustments. This feature gives you the benefit of seamless
noise reduction through downward expansion ridding the signal of
unwanted background noise. A 4 segment LED meter monitors
the degree of expansion.
v
De - Esser.
A variable De-Esser with a range of 800Hz to
8kHz removes unwanted sibilance (hiss or “S” sounds) while
allowing the signal to remain completely natural. The Threshold
control makes setting the De-Esser extremely precise and fine-
tuning a simple process. Above the controller, a 4 segment LED
shows the operation of the De-Esser and how much gain is
reduced to eliminate the sibilance.
v
4 Band Semi-Parametric Equalizer.
Total tonal control is what
the Equalizer section provides. Low and High Shelving coupled
with Low Mid and High Mid controls with an extremely wide
Frequency band and narrow “Q” will let you fine tune the sound
to suit your taste with exacting precision.
Ø
Low Shelving.
The Low frequency control is fixed at 100
HZ with plus or minus 12 dB giving ample boost or cut at the
frequency.
Ø
Q Switch.
A switchable Q function decreases or increases
the width of the frequency control parameters. The frequency
width is selectable from .5 or by a factor of 2.
Ø
Low Mid-Range.
The Low Mid-Range control is a
concentric control with the outer ring for Level adjustments of
plus or minus 12 dB and the center knob for setting the
frequency(90Hz to 700Hz) of boost or cut.
