13
4
Connecting Your Audio System
4.1
Level Setting Procedure
StudioLive™ Series III Rack Mixers
Owner’s Manual
5. Select Channel 1 in UC Surface.
6. If your microphone requires phantom power, 48V button.
7. Speak or sing into your microphone at approximately the same volume you
expect during the performance.
8. Adjust the input trim in UC Surface while watching the input meter. Adjust the
input gain until the meter reaches a little more than halfway up. The meter
should never turn red.
9. Raise the Channel 1 fader in UC Surface until it reaches 0 dB (unity gain).
10. In UC Surface, bring up the Main mix level fader until you can
comfortably listen to your microphone through your speakers.
From this point, you can use the Fat Channel to add dynamics processing and EQ
as needed. For details on using the Fat Channel
see the StudioLive Software Library
Reference Manual
.
