PRESONUS FIRESTUDIO TUBE, User Manual

Page: 27 / 37

CONTROLS & CONNECTIONS
25
| PreSonus 2008
Master Output Section
•
Master Output Fader
Changes the selected output’s audio level
Move the Master Fader up and down to increase and
decrease the level of the selected output’s audio.
The dB value of boost or attenuation is displayed below the
Channel Fader from –infinity to 0.0 dB.
Two virtual LED meters to the right of the Master Fader
display the pre fader levels of the audio signal.
The peak value in dBFS of the channel’s audio is displayed
directly above the Master Output’s virtual LED meter.
NOTE:
If the peak values display “CLIP”, then your
Mixer channels and/or your DAW playback levels
should be reduced. The clip indicators clear when
the mouse pointer hovers over them.
•
Master Mute and Solo Clear
Clears all active channel Mutes or Solos
The Master Mute and Solo clear buttons are only active
when a channel’s mute or solo button is active.
3.1.3 FireControl Mixer
The FireControl Mixer allows you to create a customized mix of up to 22 of the FireStudio Tube’s hardware
inputs and software playback outputs and adjust their levels independently for each of the FireStudio Tube’s
stereo output pairs with zero latency. The Mixer section is only visible if the selected output pair’s Mixer
Toggle is on.
NOTE:
The Mixer is common to all of the FireStudio Tube’s outputs, so if you add or remove a channel from
the Mixer, every output with the Mixer Toggle on will be affected by the change.
These are the individual elements of the Mixer and their functions:
•
Channel Pan Sliders
Moves the channel’s audio left/right in the stereo field
Double-clicking the slider returns the pan to center.
• Link Buttons
Links the adjacent channels as a stereo pair