President's Choice PC25774 Instruction Manual Download Page 3

Page: 3 / 44

1. Do not store or use gasoline or other flammable

liquids or vapours in the vicinity within 7.62 m/25 ft

of this or any other appliance.

WARNING:

Improper installation, adjustment, alteration, service or

maintenance can cause injury or property damage.

Read the installation, operation and maintenance

instructions thoroughly before installing or servicing this

equipment.

DANGER:

Failure to follow these instructions could result in a

fire or explosion that could cause property damage,

personal injury or death.

DANGER:

DO NOT use gas grill for indoor cooking or heating.

TOXIC fumes can accumulate and cause asphyxiation.

DO NOT use in or on boats or recreational vehicles.

WARNING:

FOR YOUR SAFETY:

For outdoor use only (outside any enclosure).

Summary of Contents for PC25774













































Search results

Summary of Contents for PC25774

Reviews:

Related manuals for PC25774

Brands by name

Popular brands

President's Choice PC25774, Instruction Manual

Search results

Summary of Contents for PC25774

Reviews:

Related manuals for PC25774

Brands by name

Popular brands