24
- Frequency response
: 300 Hz to 3 kHz
- Adjacent channel selectivity
: 60 dB
- Maximum audio power
: 1 W
- Squelch sensitivity
: min: 0.2 µV - 120 dBm
max: 1 mV - 47 dBm
- Frequency image
rejection rate
: 60 dB
- Intermediate frequency
rejection rate
: 70 dB
- Drain
:
See
ECO MODE
page 17
- Internal speaker
: 16 ohms, 1 W
J) TROUBLE SHOOTING
1) YOUR CB RADIO WILL NOT TRANSMIT OR YOUR
TRANSMISSION IS OF POOR QUALITY
-
Check that the antenna is correctly connected.
-
Check that the SWR is properly adjusted (Mobile Configuration
only).
-
Check that the programmed configuration is the correct one
(see table page 65)
.
2) YOUR CB RADIO WILL NOT RECEIVE OR RECEPTION
IS POOR
-
Check that the squelch level is properly adjusted.
-
Check that the programmed configuration is the correct one
(see table page 65)
.
-
Check that the volume is set to a comfortable listening level.
-
Check that the antenna is correctly connected and that the
SWR is properly adjusted (Mobile configuration only).
-
You are using the same modulation mode than your correspond-
ent.
3) YOUR CB WILL NOT LIGHT UP
-
Check the battery or power supply.
-
Check the fuse (Mobile Configuration only).
K) HOW TO TRANSMIT OR RECEIVE A MESSAGE
Now that you have read the manual, make sure that your CB
Radio is ready for use (i.e. check that your antenna is connected).
Choose your channel (19, 27).
English
