11
Press
PTT
switch (
13
),
9/19 / DW
key (
10
) , or long press
SCAN
key (
9
) again to exit
SCAN
function.
WEATHER
MODE
Press and hold the
SCAN
key (
9
) for 1 second to activate
the
SCAN
function (for
WEATHER channels
) in an increasing
way.
“SCAN”
is displayed. The scanning stops as soon as
there is a busy channel. The scanning starts again in an
increasing way by turning to the right the
CH
rotary knob
or pressing the
UP
key (
6
) on the microphone, or in a de-
creasing way, by turning to the left the
CH
rotary knob or
pressing the
UP
key (
6
) on the microphone.
Note:
If the
ALERT
function is activated, the SIREN tone
sounds
(see §
ALERT
below)
when a tone is detected in the
selected
WEATHER channel only. Use first
SCAN
function in
WEATHER
mode to detect tones in
all
the WEATHER channels.
A new long press on
SCAN
disables the
SCAN
function.
M2
See §
MEMORY
page 12
.
10) 9/19 ~ DW ~ M3
9/19
(short press)
Channels 9 and 19 are automatically selected by pressing
this key. A push activates channel 9,
“EMG”
is displayed. A
new push activates channel 19,
“EMG”
is displayed. A new
push returns to the previous channel,
“EMG”
disappears.
DW
(long press)
Press and hold the
DW
key (
10
) for 1 second to activate the
DUAL WATCH
function.
“DW”
is displayed. This function lets
you watch over channel 9 or 19 and the current channel. The
first long press activates the
DW
function between channel
9 and the busy channel. A new long press activates the
function between channel 19 and the busy channel. The
number of the selected channel, the memorized channel
included and channel 9 or 19 are alternately displayed.
“EMG”
is also displayed at the same time as channel 9 or
19. The selected channel can be modified during the dual
watch. A new long press on
DW
key (
10
) disables the
DW
function.
“DW”
disappears.
M3
See §
MEMORY
page 12
.
11) •F/MEM ~ LOCK ~ •RF GAIN
•F/MEM
(short press)
Short press this key to enter in mode
2
nd
FUNCTION
. blinks
when the function is
on.
automatically disappears after
10 seconds without pressing any key.
For memories, see §
MEMORY
page 12.
LOCK
(long press)
Allows to lock all the keys on the front panel. If the
KEY BEEP
function is on, an error beep sounds when a key is pressed.
A long press on
LOCK
key (
11
) activates/deactivates the
LOCK
function. appears on the display when the func-
tion is activated. Transmission (microphone or vox) and
reception remain active.
•RF GAIN
(•F/MEM + •MIC/RF GAIN + CH rotary)
- Short press •
F/MEM
key (
11
)
- Short press •
MIC/RF GAIN
key (
11
)
(or press 2 times the key
11
)
.
- Turn the
CH
rotary knob (
6
) to adjust the gain with bargraph.
- Long press the
CH
knob to validate the setting.
RF Gain bargraph always will be displayed in
RX
mode.
English
