2. Ease the sink [B] into the cabinet [A],
ensuring that it is placed evenly and is
centered on the cabinet. Wipe off any
excess sealant. Use masking tape to
hold the sink in place until the sealant
dries.
Placement
Move the assembled unit to the final
location. If required, level the unit by
adjusting the cabinet feet [F].
F
Supply Line Assembly
The supply lines, which attach the faucet
to the household water system, are not
supplied with this unit. They need to be
purchased separately. Follow the supply
line manufacturer’s instructions for proper
installation.
Care and Maintenance
CARTRIDGE REPLACEMENT
To replace the cartridge, please follow
these steps:
WARNING: Before proceeding, turn
off the water supply to the faucet.
Handle
body
Water temperature sign
Screw
Cap
Rings
Cartridge
Faucet body
1. Take off the plastic water temperature
sign by hand, then use the Alen wrench
[I] to take out the screw and pull out
the handle body. The top lever of the
cartridge will be exposed.
2. Unscrew the cap and rings, making sure
not to damage the threads.
3. Pull out the cartridge and replace it with
a new 35 mm (1.4) ceramic cartridge.
4. Replace the rings and the cap.
5. Place the handle body on the cartridge.
Lock the screw back onto the handle
body and tighten it with the Allen
wrench [I]. Do not over tighten.
6. Put the plastic water temperature sign
back into the hole, make sure that red is
on the left and blue is on the right.
7. Slowly open the water feed to the
faucet to test.
CLEANING YOUR SINK
To maintain the smooth, high gloss surface
of your sink, follow these tips:
• Use common household cleaners (non-
abrasive) or a mild liquid dish washing
