background image

12

 

Care and Cleaning

 
Your sink is manufactured with the highest grade stainless steel and will provide you many years of enjoyment with the proper care .

Do

Do Not

 

- After use, always rinse your sink with tap water to 

dilute and remove deposits .

 

- Towel dry the sink after use whenever possible 

to prevent water spots . Should water spots occur, 
clean with a mild solution of vinegar and water 
followed by a thorough rinse .

 

- Use liquid soap, a general household cleaner, or   

a weak solution of vinegar and water for regular  

 cleaning .

 

- Only use plastic scouring pads recommended for  

use in stainless steel sinks, and only use them in  
the bowl of the sink . Scrub in the direction of the  
grain (original polish lines) . 

 

- Do not allow any food, detergent, soap or grease  

to dry or sit for extended periods of time on the  

 surface of the sink .

 

- Never use abrasive cleaning products, as they will 

dull and scratch the finish.

 

- Do not use scouring pads on the deck, as they will 

dull the mirror finish.

 

- Never use steel wool pads, as they will leave iron  

particles on the sink, which will cause corrosion .

 

- Never leave steel or cast iron pans in your  

sink for extended periods of time, as this can  
cause corrosion .

Summary of Contents for QK031















Reviews: