PreSens OXY-1 ST Trace, Instruction Manual, Page: 10 / 14

10
© 2017 PreSens Precision Sensing GmbH
OXY-1 ST (Trace)
Set-Up
4. Now start the PreSens Measurement Studio (PMS2) software on your PC / notebook.
(The OXY-1 ST always has to be connected via USB before the software is started.) After
successful initialization the software main screen is displayed and the OXY-1 ST will show
in the
Device section.
For further details on how to use the PreSens Measurement Studio please refer to the
software instruction manual.
Important Considerations for USB Handling
!
PreSens recommends the use of a dedicated USB 2.0 PCI Card to connect and
handle USB PreSens Devices with a Desktop PC.
!
In order to enhance the system stability avoid the use of USB hubs and connect
PreSens Devices directly to your PC / notebook USB Ports.
!
If possible, disconnect all other USB devices that are not in use, as they may reduce
or disturb the USB resources of your PC / notebook.
!
Docking stations may also reduce or disturb the USB resources of your PC / notebook
and therefore affect the correct function of the software.
!
It is also recommended to disable the Power Saving Settings of your USB Root
controller.
Fig. 3 Connecting the temperature sensor