Before using the wine cooler, remove all packaging materials including bottom
cushions and foam pads and tapes inside the wine cooler, tear off the
protective film on the door and the
wine cooler body.
Install
a
tion Instruction
s
Placement
Install t
he wine cooler in a well-ventilated indoor place; the ground shall
be flat, and sturdy (rotate left or right to adjust the wheel for leveling if
unstable).
Keep away from heat and avoid direct sunlight. Do not place the wine cooler
in moist or watery places to prevent rust or reduction of
the
insulating effect.
T
he hot air from
the
side wall
s
of
the c
ooler shall be exhausted
without restrictions
, or
the
compressor's power will increase and further increase power consumption. Thus
the distance between cooler and walls or neighboring furniture shall
not
be
less than
4cm
Wipe the wine cooler inside and outside with
a
warm moist rag (add a small
amount of detergent in the warm water and wipe
c
lean with clean water
at the end
).
Please leave enough space to ensure
easy
opening .
Dimensions shown are for reference only.
The wine cooler shall stay
still
for half an hour before connecting 115V/60Hz
power when it is started
for the first time
.
The wine cooler shall run 2 to 3 hours before loading wine; the
wine cooler
shall run for more than 4 hours in summer in advance considering that the
environmental
temperature is high.
5
18.9inch
15.4inch
32.9inch
28.7inch
